Panasonic SA-BT222EB Service Manual page 66

Step 5 Remove 2 screws on D-Amp P.C.B..
Step 6 Release P.C.B. Spacer by using long nose plier.
Step 7 Remove 4 screws.
Step 8 Release the tab of the side of the Rear Panel in the
direction of arrow.
Step 9 Remove D-Amp P.C.B. according to direction of arrow
shown.
Caution: During assembling, ensure that D-Amp P.C.B. is
seated properly at the locators.
66