Caution: Ensure that the Shaft B of DVD Lid Unit is fully
inserted into Slot B of Front Panel.
10.14. Disassembly of Front Shield
Plate Unit
• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Remove 2 screws.
Step 2 Remove 1 screw.
Note: Replace the Gaskets if broken.
Step 3 Slightly lift up the Front Shield Plate Unit to release 2
catches at both sides.
Step 4 Remove Front Shield Plate Unit.
Caution: During assembling, ensure that Front Shield is
properly inserted & fully fixed onto the Bottom Chassis.
57