Specifications - Panasonic SC-HTB250GA Service Manual

4 Specifications

AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
Front ch
40 W per channel (6 Ω),1 kHz,10%, THD
Subwoofer ch
40 W per channel (4 Ω),100 Hz,10%, THD
Total RMS Dolby Digital mode power
TERMINALS SECTION
HDMI output (ARC)
Output connector
Digital audio input
Optical digital input
Sampling frequency
Audio format
LPCM, Dolby Digital, DTS Digital Surround
USB Port
USB standard
Media file format support
Sampling frequency
Audio word size
Channel count
USB device file system
®
Bluetooth SECTION
Version
Class
Supported profiles
Operating frequency
Operating band
Operating distance
Maximum RF Power
Supported codec
SPEAKER SECTION
Front speakers (Built-in)
Full range
Active subwoofer
Woofer
120 W
Type A (19 pin)
Optical terminal
32 kHz, 44.1 kHz, 48 kHz
USB 2.0 full speed
MP3 (*.mp3)
32 kHz, 44.1 kHz, 48 kHz
16 bits
2 channels
FAT16, FAT32
Bluetooth® Ver. 2.1+EDR
Class 2
A2DP,AVRCP
2.4 GHz band FH-SS
2402 MHz to 2480 MHz
10 m line of sight
4 dBm
SBC
4 x10 cm (cone type) x 1/ch
14 cm cone type x 1
WIRELESS SECTION
Wireless module
Frequency Range
No. of channels
RF output power
GENERAL
Power supply
Power consumption
Main unit
Active subwoofer
Dimensions (W x H x D)
Main unit
Active subwoofer
TM
Mass
Main unit
Active subwoofer
Operating temperature range
Operating humidity range
Power consumption in standby mode
(approximate)
Main unit
®
When Bluetooth
When Bluetooth® standby is on
Active subwoofer
When wireless activated in network standby
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by a digital spectrum
analyzer.
8
2404 MHz to 2476 MHz
7 dBm (max.)
AC 220 V to 240 V, 50/60 Hz
450 mm x 51 mm x 135 mm
97 mm x 451 mm x 307 mm
20% to 80%RH(no condensation)
standby is off
38
15 W
7.5 W
1.6 kg
4.4 kg
0 o to +40 o
C C
0.5 W
2.0 W
0.5 W
2.0W