Step 2 Detach 13P FFC at the connector (CN4002) on Optical
In P.C.B..
Step 3 Slightly pull Optical In P.C.B. outwards as arrow (1)
shown.
Step 4 Press Optical In P.C.B. downwards to release it from the
locator as arrow (2) shown.
Step 5 Remove Optical In P.C.B..
10.6. Disassembly of Rear Panel
• Refer to "Disassembly of Optical In P.C.B.".
Step 1 Lift up the Wire Clamper.
Step 2 Detach the fan unit connector (CN5401) on D-Amp
P.C.B..
Step 3 Remove 7 screws.
Step 4 Release the tabs on both side of the Rear Panel in the
direction of arrow.
Step 5 Remove Rear Panel.
46