Panasonic SA-BT222EB Service Manual page 82

Step 7 Twist the Wire Clampers to release 6P cable (SMPS
P.C.B. to D-Amp P.C.B.) & 10P cable (SMPS P.C.B. to Main
P.C.B.).
Step 8 Remove 5 screws.
Caution: During releasing of the P.C.B. Spacer, avoid
touching the electrical components.
Step 9 Release P.C.B. Spacer by using long nose plier.
Step 10 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Step 11 Proceed to check and repair SMPS P.C.B..
82