Rear Brake Pedal Position Adjustment; Rear Brake Idle Stroke Adjustment - Husqvarna TE 310-450-510 210 I.E. Owner's Manual

REAR BRAKE PEDAL POSITION ADJUSTMENT

The position of the rear foot brake pedal as to the footrest may
be adjusted according to the individual needs. For the adjust-
ing proceed as follows:
- loosen the screw (1);
- turn the cam (2) in order to adjust the brake pedal idle
stroke (A);
- the operation done, tighten the screw (1).
38
The adjusting operation carried out, adjust the idle stroke of
the pedal as follows.

REAR BRAKE IDLE STROKE ADJUSTMENT

The rear brake foot pedal should have a (B) 5 mm (0.2 in.)
idle stroke before starting the true braking action.
Should this not happen, operate as follows:
- loosen nut (3);
-
operate the pump rod (4) to increase or decrease the idle
stroke;
- tighten nut (3) at the end of the operation.
WARNING
When the idle stroke figures are not met,
the brake pads will be subjected to a fast
wear that may bring to the TOTAL BRAKE IN-
EFFECTIVENESS.