Warm Starting - Husqvarna TE 310-450-510 210 I.E. Owner's Manual

8) COMPLETELY lower the pedal (4) until the engine starts.
WARM STARTING: BEFORE MOTORCYCLE
STARTING, PRESS RED CHOKE KNOB (3) ON
CARBURETOR TOWARD THE INSIDE IN ORDER
TO DEACTIVATE THE STARTING DEVICE.
In case the engine does not start, repeat this procedure.
4
TC-TXC
IMPORTANT NOTE IN CASE OF COLD STARTS AT
LOW TEMPERATURES
It is recommended to briefly warm-up the engine at idle until,
after having disengaged the starter, there is a normal re-
sponse from the engine when opening the throttle.
In this way the oil can reach all the surfaces needing lubrica-
tion and the coolant will reach the necessary temperature for
correct engine function.
Avoid overheating the engine.
Never accelerate the engine after a cold start.
WARNING*: Exhaust contains poisonous car-
bon monoxide gas. Never run the engine in
a closed garage or in a confined area.
In the case of using a kick-starter, follow
carefully the instructions on the page 23
keep in mind the undermentioned note.
Kick start pedal
WARNING*: This high performance motorcy-
cle can some times «kick back» strongly
when you are starting it.
Do not attempt to start this motorcycle un-
less you are wearing high top heavy sided
riding boots. You could seriously hurt you
leg if the kickstarter kicked back and your
foot slipped.
3
IMPORTANT
25