After Washing - Husqvarna TE 310-450-510 210 I.E. Owner's Manual

it is necessary ABSOLUTELY TO AVOID THAT
HIGH PRESSURE JETS OF WATER OR AIR come
to contact with THE ELECTRICAL PARTS and
any parts of the INJECTION SYSTEM, espe-
cially the electronic central unit (1) and the
M.A.Q.S. unit (2).
2
90

After washing

- Remove the plastic bags, and clean the air cleaner intake.
- Lubricate the points listed in the Maintenance Table (Appendix A).
- Briefly warm-up the engine
- Test the brakes before riding the motorcycle.
WARNING*: Never wax or lubricate the
brake disc. Loss of braking and an accident
could result. Clean the disc with an oilless
solvent such ans acetone. Observe the sol-
vent warnings.
1