Specifications - Pioneer KRP-500A Operating Instructions Manual

13 Additional information

Specifications

Item
Number of pixels
Audio amplifier
Sound Effect
Power Requirements
Weight
Terminals Rear
Item
Color System
TV Function Receiving System
Tuner
Auto Channel Preset
Audio multiplex
Terminals Rear
Front
Power Requirements
Weight
*1
This conforms to HDMI1.3 (Deep Color) and HDCP1.1. HDMI (High-Definition Multimedia Interface) is a digital interface that handles both video and audio using a
single cable. HDCP (High-bandwidth Digital Content Protection) is a technology used to protect copyrighted digital contents that use the Digital Visual Interface (DVI).
*2
This conforms to USB1.1 and 2.0 specifications.
Design and specifications are subject to change without notice.
68
En
50" display, model: KRP-500P
1920 x 1080 pixels
18 W + 18 W (1 kHz, 10 %, 6 Ω)
SRS FOCUS/SRS/SRS TruBass/SRS Definition
110 V to 240 V AC, 50 Hz/60 Hz, 386 W (0.2 W Standby/110 V AC)
31.4 kg (69.2 lbs)
6 Ω to 16 Ω
SPEAKERS
SYSTEM 1
CABLE
Color sensor 1
Media Receiver, model: KRP-M01
PAL/SECAM/NTSC/4.43 NTSC/PAL-M/PAL-N
PAL: B/G, D/K, I SECAM: B/G, D/K NTSC: M/N
VHF/UHF 44.25 MHz to 863.25 MHz
CATV Hyper-band, S1 ch to S41ch
99 ch (General), 68 ch (Air, US Type), 125 ch (Cable, US Type), Auto Preset
NICAM/A2/BTSC System
INPUT 1 COMPONENT VIDEO in, VIDEO in, S-VIDEO in, AUDIO in
INPUT 2 COMPONENT VIDEO in, VIDEO in, S-VIDEO in, AUDIO in
INPUT 3 VIDEO in, S-VIDEO in, AUDIO in, HDMI in
INPUT 4 *1
HDMI in
INPUT 5 *1
HDMI in
CONTROL OUT 1
SYSTEM 1
CABLE
MONITOR OUT AV out
SUB WOOFER Variable
OUT
75 Ω Din Type for VHF/UHF in
Antenna
INPUT 6 VIDEO in
PC INPUT Analog RGB
INPUT 6/ AUDIO in
PC INPUT
*2
USB USB in
16 Ω to 32 Ω recommended
PHONES
110 V to 240 V AC, 50 Hz/60 Hz, 26 W (0.2 W Standby/110 V AC)
4.3 kg (9.5 lbs)
*1