Using The Hdmi Control; Using The Hdmi Control Functions - Pioneer KRP-500A Operating Instructions Manual

11

Using the HDMI Control

Chapter 11
Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player or AV
system that support the HDMI Control functions using the remote
control of the flat screen TV.
The HDMI Control functions include playback of content using on-
screen control panel on the display, recording of a TV program
while watching, timer recording using a program list on the
connected recorder, and confirmation of timer recording
registered in the recorder. For details, see the table below.
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the flat screen TV is
as follows: recorder x 2, player x 2, AV system x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Function Description
Playback of
The proper input source is automatically
content
selected and the content is played back on the
display as you press PLAY on the connected
device
On-screen Recorder/player operation can be controlled
control
on-screen or with the remote control unit of
the flat screen TV (play, stop, fast forward/
reverse, etc.)
Recording of TV The program now watching can be recorded
program
using the remote control unit of the flat
screen TV
Timer recording Timer recording using a program list on the
recorder connected
Confirmation of Recording schedule registered in the
recording recorder can be displayed and confirmed on
schedule
the screen using the remote control unit of
the flat screen TV
Display Information on the display menu language is
Language
transferred to the recorder or player
Setup
connected to the Media Receiver. For details,
see the operation manual that came with the
recorder or player.
AV system
Receiver/amplifier operation can also be
control
controlled with the remote control unit of the
flat screen TV (volume, surround mode and
input selection of the HDMI terminal)
Power On The connected recorder can be turned On
when the flat screen TV is turned On.
The flat screen TV can be turned On when the
connected recorder(s) or player(s) is turned
On and images are input to the flat screen TV.
Power Off
The connected device(s) can be turned Off
when the flat screen TV is turned Off
58
En
P
HDMI
CONTROL
DVD
TOP MENU
/GUIDE
ENTER
HOME
MENU
MENU
Note
• When using the HDMI Control functions, operate the remote
control unit while pointing it toward the remote control sensor
( ) located at the bottom right of the front panel of the display.
t
Usable
devices
• You cannot use two or more HDMI terminals on the Media
Receiver at the same time except "Power Off" and "Display
Recorder/
Language Setup" functions.
player
Recorder/
player
Recorder
Recorder
Recorder
Recorder/
player
AV system
Recorder
Recorder/
player
Recorder/
player/AV
system
+/– or
• Press i e
volume for the AV system.
• Press , , , , ENTER,
RETURN ( ) or color (RED,
GREEN, YELLOW, BLUE)
INFO
buttons to use functions such
as the disc navigator on the
connected recorder or player.
RETURN
to adjust