Sound Adjustments - Pioneer KRP-500A Operating Instructions Manual

08 Setting up
• If you exit the selection from the "After" screen, the new entry
is stored in the memory and the button no longer works.
• If you move and change the "AV Selection" parameter, the new
entry in the current parameter is stored in the memory and the
button continues to work.
• You cannot compare images between different parameters on
the "AV Selection" menu ("STANDARD" and "MOVIE", for
example).
• When you select this function, "Intelligent Mode" for "Pro
Adjust" on the "Picture" menu, and "Room Light Sensor" on the
"Option" menu are all set to off and image quality returns to
default settings.
• This function is not selectable:
– when "OPTIMUM" is selected for "AV Selection",
– when you select "AV Selection",
– when you select "Yes" or "No" on the confirmation screen for
"Reset" from the "Picture" menu or
– when you select a menu from the PC source

Sound adjustments

You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV Selection
option (see AV Selection on page 31).
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select an item to be adjusted (/).
4 Select the desired level (/).
Sound
Treble
Bass
Balance
Sound Effect
Reset
AVC
 button
Item
Treble For weaker treble
Bass For weaker bass
Balance Shifts the audio balance to
the left
5 Press HOME MENU to exit the menu.
Note
• You can adjust the sound for listening with headphones.
• To restore the factory defaults for "Treble", "Bass", "Balance"
and "Sound Effect" options, press / to select "Reset" in step
3, and then press ENTER. A confirmation screen appears.
Press / to select "Yes", and then press ENTER.
36
En
STANDARD
2
0
0
Off
 button
For stronger treble
For stronger bass
Shifts the audio balance to
the right
• You cannot restore the factory default for "AVC".
Sound Effect
You can select from SRS FOCUS, SRS, SRS TruBass and SRS
Definition.
1 Press HOME MENU.
2 Select "Sound" (/ then ENTER).
3 Select "Sound Effect" (/ then ENTER).
4 Select "SRS FOCUS", "SRS", "SRS TruBass" or "SRS
Definition" (/).
5 Select the desired parameter (/).
TM
SRS FOCUS
Moves sound source direction vertically and makes sound and voice clearly
audible
Selections Off
Low
Mid
High
®
SRS
Effortlessly produces a three-dimensional sound field
Selections Off
Low
Mid
High
®
SRS TruBass
Produces a clear, rich bass tone
Selections Off
Low
Mid
High
®
SRS Definition
Improves midrange quality and clarifies voice and instrument sound
Selections Off
Low
Mid
High
6 Press HOME MENU to exit the menu.
Note
• (SRS WOW HD
FOCUS, SRS, SRS TruBass and SRS Definition are on.
• You can adjust the sound effect for listening with headphones.
• The effect of this function differs depending on signals.
Deactivates SRS FOCUS
Moderate SRS FOCUS
Standard SRS FOCUS
Enhanced SRS FOCUS
Deactivates SRS
Moderate SRS
Standard SRS
Enhanced SRS
Deactivates SRS TruBass
Moderate SRS TruBass
Standard SRS TruBass
Enhanced SRS TruBass
Deactivates SRS Definition
Moderate SRS Definition
Standard SRS Definition
Enhanced SRS Definition
TM
) denotes a status where SRS