Part Names; Display - Pioneer KRP-500A Operating Instructions Manual

04

Part names

Chapter 4
Part names

Display

(Front)
Bottom
1
Power On (a) button
2 Power ON indicator
3 STANDBY indicator
(Rear)
(upper bank)
1 SPEAKERS terminals (right/left)
• Do not connect any devices to the speaker terminals other than
the speakers specified.
• Do not leave speaker cable wires bare and exposed at the
terminals. Exposed wires can result in an electrical short
causing malfunction or damage to the system.
2 SYSTEM CABLE terminal
12
En
1 2 3
1 2 3 4
4 5
4 Room Light sensor
5 Remote Control sensor
Viewed from the
underside of the display
3 Color sensor terminal (used when connecting the optional
color sensor)
4 RS-232C terminal (SERVICE ONLY)
(used for factory setup)
5 AC IN terminal
5