Connecting A Personal Computer; Connecting An Amplifier/Av Receiver; Avoiding Unwanted Feedback - Pioneer KRP-500A Operating Instructions Manual

Flat screen tv
Hide thumbs Also See for KRP-500A:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

Using with other equipment

Connecting a personal computer

Use the PC terminals to connect a personal computer.
• The PC input terminal is DDC1/2B-compatible.
Media Receiver (front)
USB
INPUT 6
PHONES
VIDEO
L AUDIO R
Stereo audio cable
Personal computer
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC
on the remote control unit or press INPUT on the Media Receiver
to select "PC".
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image
does not come in clearly, you may need to use Auto Setup menu.
See page 39.
Note
• The PC terminals cannot be used for audiovisual equipment.
Computer compatibility chart
Resolution
Frequency
720 x 400
70 Hz
640 x 480 (VGA)
60 Hz
800 x 600 (SVGA)
60 Hz
1280 x 720
60 Hz
1024 x 768 (XGA)
60 Hz
1360 x 768 (Wide-XGA)
60 Hz
1280 x 1024 (SXGA)
60 Hz
ANALOG RGB
PC
RGB cable

Connecting an amplifier/AV receiver

You can enjoy more powerful sound by connecting an amplifier/AV
receiver and subwoofer to the Media Receiver.
Media Receiver (rear)
Stereo audio cable
AV receiver
Note
• For details, refer to the operation manual for the audio
equipment to be connected.
• If your amplifier/AV receiver has a subwoofer output, it is not
necessary to connect the subwoofer output on the Media
Receiver.
• Audio signals corresponding to the currently displayed images
are always output to the MONITOR OUT and SUB WOOFER
OUT terminals.

Avoiding unwanted feedback

You can prevent unwanted feedback from adversely affecting the
quality of images. Specify the output terminal whose output is to be
inhibited.
1
Press HOME MENU.
2
Select "Option" (/ then ENTER).
3
Select "Monitor Out" (/ then ENTER).
4
Select the desired parameter (/ then ENTER).
Monitor Out
Always Output
INPUT 1 Prohibit
INPUT 2 Prohibit
INPUT 3 Prohibit
INPUT 4 Prohibit
INPUT 5 Prohibit
INPUT 6 Prohibit
10
Audio cable
Subwoofer
47
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents