6.11.8 WPS 5GHz
Refer to
6.11.3
for WPS setup procedure.
WPS can be disabled / enabled by selecting the corresponding option and click
"Apply/Save"
a. When enabled in configured mode, use Push button or PIN to allow client
connection.
To activate Push button, click on the "Add Enrollee PBC" button or use the 5G WiFi
On/Off & WPS button on the front panel.
Enter the STA PIN and click the "Add Enrollee PIN" button to active PIN mode
connection
b. When enabled in unconfigured mode, enter the Device PIN to the external
registrar for PIN mode setup.
115