Wake-On-Lan - Comtrend Corporation WR-6895 User Manual

8.7 Wake-on-LAN

This tool allows you to wake up (power on) computers connected to the Broadband
Router LAN interface by sending special "magic packets".
The network interface card in the computer or device that is going to be woken up
must support Wake-on-LAN.
LAN Interface – Select the LAN interface to send the Wake-on-LAN packet.
MAC Address – Specify the MAC address of the device that is going to be woken up.
Click "Send WoL magic packet to the Broadcast address" if the WoL packets
should be sent to the broadcast address.
Click the Wake Up! button to send the magic packet out to the LAN interface.
138