6.4 Routing
The following routing functions are accessed from this menu:
Default Gateway, Static Route, Policy Routing and RIP.
NOTE:
In bridge mode, the RIP menu option is hidden while the other menu
options are shown but ineffective.
6.4.1
Default Gateway
The default gateway interface list can have multiple WAN interfaces served as
system default gateways but only one will be used according to the priority with the
first being the highest and the last one the lowest priority if the WAN interface is
connected. Priority order can be changed by removing all and adding them back in
again.
Click Apply/Save to apply and save the settings.
80