Understanding the printer menus
Use
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Blank Pages
Do Not Print
Print
Print Settings
Setup menu
Use
Printer Language
PCL Emulation
PS Emulation
Print Area
Normal
Whole Page
To
Specify the paper source for separator sheets.
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for
Multipurpose Feeder to appear as a menu setting.
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
To
Set the default printer language.
Notes:
•
PCL Emulation is the factory default setting.
•
PostScript emulation uses a PostScript interpreter for
processing print jobs.
•
PCL Emulation uses a PCL interpreter for processing
print jobs.
•
Setting a printer language default does not prevent a
software program from sending print jobs that use
another printer language.
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the
Normal setting, the printer clips the image at the
boundary.
•
Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting. This
setting affects only pages printed using a PCL 5e
interpreter and has no effect on pages printed using the
PCL XL or PostScript interpreter.
148