Lexmark M1100 Series User Manual page 187

Troubleshooting
Not enough free space in flash memory for resources [52]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For
non‑touch‑screen printer models, press
•
Delete fonts, macros, and other data stored in the flash memory.
•
Upgrade to a larger capacity flash memory card.
Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
Parallel port disabled [56]
•
Depending on your printer model, touch Continue or press
printing.
Notes:
•
The printer discards data received through the parallel port.
•
Make sure that the Parallel Buffer menu is not disabled.
Printer had to restart. Last job may be incomplete.
Select Continue on the control panel to clear the message and continue printing. For non‑touch‑screen
printer models, press
For more information, go to
Reinstall missing or unresponsive cartridge [31.xy]
Try one or more of the following:
•
Check if the toner cartridge is missing. If missing, then install the toner cartridge.
For information on installing the toner cartridge, see the "Replacing supplies" section.
•
If the toner cartridge is installed, then remove and reinstall the unresponsive toner cartridge.
Note: If the message appears after reinstalling the supply, then replace the toner cartridge. The
cartridge may be defective or a non‑genuine Lexmark supply. For more information, see
genuine Lexmark parts and supplies" on page
to confirm.
http://support.lexmark.com
to confirm.
to clear the message and continue
or contact customer support.
162.
187
"Using