Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Using The Standard Bin And Paper Stop - Lexmark M1100 Series User Manual

Using M1145

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more
information, see "Avoiding jams" on page 170

Setting the paper size and type

1
From the printer control panel, navigate to:
> Settings >
2
Press the up or down arrow button to select the tray or feeder, and then press
3
Press the up or down arrow button to select the paper size, and then press
4
Press the up or down arrow button to select the paper type, and then press
Configuring Universal paper settings
The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the
printer menus.
Notes:
•
The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the
multipurpose feeder.
•
The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper
sources.
1
From the printer control panel, navigate to:
> Settings >
unit of measure >
2
Select Portrait Width or Portrait Height, and then press
3
Press the left or right arrow button to change the setting, and then press

Using the standard bin and paper stop

The standard bin holds up to 150 sheets of 75‑g/m
includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.
and
> Paper Menu > > Paper Size/Type >
> Paper Menu > > Universal Setup >
"Storing paper" on page
.
2
(20‑lb) paper. It collects prints facedown. The standard bin
110.
.
.
to change the settings.
> Units of Measure >
.
38
> select a