Yamaha CS1D Service Manual page 21

CS1D
3-6 Remove the nine (9) screws marked [150]. The CS PNM1
circuit board can then be removed.
3-7 Remove the switch knobs marked [A] on the circuit board.
(Fig. 3)
4. Fader Assembly, CS PNM2 Circuit Board
4-1 Remove the control panel assembly (MASTER).
(See Procedure 1.)
4-2 Remove the fader knob. (Fig. 3)
4-3 Remove the two (2) screws marked [220]. The Fader
assembly can then be removed. (Fig. 2, Fig. 3)
4-4 Remove the screw marked [200]. The CS PNM2 circuit
board can then be removed. (Fig. 2)
4-5 Remove the switch knobs marked [B] on the circuit board. (Fig. 3)
[130]x36
Encoder knob x36
[130]: Hexagonal Nut 7.0 10 x 2 MFZN2BL (ES200180)
[150]: Bind Head Screw 3.0 x 6 MFZN2BL (EG330360)
[170]: Bind Head Screw 3.0 x 6 MFZN2BL (EG330360)
5. CS PNM3 Circuit Board
5-1 Remove the control panel assembly (MASTER).
(See Procedure 1.)
5-2 Remove the two (2) screws marked [280]. (Fig. 3)
5-3 Remove the two (2) switch knobs marked [C]. (Fig. 3)
5-4 Remove the two (2) screws marked [275]. The CS PNM3
circuit board can then be removed. (Fig. 2)
6. CS PNM4 Circuit Board
6-1 Remove the control panel assembly (MASTER).
(See Procedure 1.)
6-2 Remove the two (2) screws marked [330]. (Fig. 3)
6-3 Remove the six (6) switch knobs marked [D]. (Fig. 3)
6-4 Remove the two (2) screws marked [325]. The CS PNM4
circuit board can then be removed. (Fig. 2)
16
CS PNM1
Spacer x5
[ 275 ]
CS PNM3
[ 275 ]
CS PNM4
CS MSCPU
[ 325 ]
Fader Assembly
Fig. 2
[ 150 ]
[ 170 ] [ 200 ] x12
[200]: Bind Head Screw 3.0 x 6 MFZN2BL (EG330360)
[275]: Bind Head Screw 3.0 x 6 MFZN2BL (EG330360)
[325]: Bind Head Screw 3.0 x 6 MFZN2BL (EG330360)
CS PNM2
x12