Yamaha CS1D Service Manual page 128

CS1D
Overall flow
Blocks and all lit
Encoder outer periphery LEDs lit up
one point at a time in the clockwise
direction.
(All encoders at the same time)
1) 5x7 LEDs
from the left x2
(
2) Fader
It can move one at a time in the
order of the left FADER and the
right FADER.
(2) All lit check mode
(3) Operation element check mode
Switches with no LED are displayed as below.
The switches around Scene Memory are displayed as numbers on the Scene Number 7-segment display unit.
• RECALL UNDO: 1.0
• STORE:
• DEC:
119
Block all lit
Block all lit
For all the blocks,
after the entire block
has been lit up, the
check proceeds.
Block
display in order
)
x2
See *1 Items common to all panels.
3.0
Current display value decremented 0.1 (minimum = 0.0)
Four 7-segment
LEDs
1) Encoder outer periphery LEDs lit up
one point at a time in the clockwise
direction.
(All encoders at the same time)
2) Two sets of three 7-segment LEDs
(After the set comprising HIGH,
HI-MID, and MID are displayed at the
same time, the set comprising
LOW-MID, LOW, and SUB LOW are
displayed at the same time.)
all lit
1) Channel select 5x7 LEDs
in order from the left x2
(
2) ST OUTPUT Fader
It can move one at a time in the
order of the left FADER and the
right FADER.
• RECALL: 2.0
• CLEAR: 0.0
Block all lit
Block all lit
display
)
x2