Removing And Installing The 2.5" Hard Disk; Removing The 2.5" Hard Disk - Fujitsu ESPRIMO Q55x Operating Manual

Removing and installing the 2.5" hard disk

Removing the 2.5" hard disk

• The top casing cover and the drive cage have been removed and the data and power
supply cables detached from the hard disk and mainboard (see
casing cover", Page 65
► Press the EasyChange rails mounted on the hard disk together slightly (1) and pull the
hard disk out of the drive cage in the direction of the arrow (2).
► Release the die EasyChange rails from the hard disk (3).
► If you do not want to remove or install any other components, replace the drive cage and
the top casing cover (see
cover", Page 66). Take care that no cables or leads become trapped.
Fujitsu
and "Removing the drive cage", Page
3
"Installing the drive cage", Page 68
"Removing the top
67).
1
2
1
3
and "Securing the top casing
System expansions
79