Indicators On The Device - Fujitsu ESPRIMO Q55x Operating Manual

Operation

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
Example: Device variant with SmartCard reader and/or palm sensor:
No. indicator
1 SmartCard reader
indicator (device
dependent)
2 Hard disk indicator
3 Power-on indicator
In energy-saving mode the device must not be disconnected from the
mains supply, as data loss may occur.
40
1 2 3
Description
The indicator lights up when the device's SmartCard reader is
accessed (device dependent).
The indicator lights up when the hard disk drive in the device
is being accessed.
Caution:In energy saving mode, the device must not be
disconnected from the mains supply as this can cause loss of data.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off (disconnected from the mains) or is
ready to operate. If the device is ready to operate, it can be
switched on with the ON/OFF switch.
Fujitsu