Table of Contents
Advertisement
2. Remove the glass bulb cover in the back
of the oven by pushing the wire holder to
the side and pulling out bulb cover.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appliance bulb.
4. Replace the bulb cover and snap the
wire holder into place. Plug in appliance
or reconnect at the main power supply.
NOTE: The oven light should not be used
during the Self-Cleaning cycle. Use during
the Self-Cleaning cycle will shorten the life
of the bulb.
If You Need Assistance
or Service
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our toll-
free telephone number for help or calling for service, please provide a detailed description of
the problem, your appliance's complete model and serial numbers, and the purchase date.
(See page 2.) This information will help us respond properly to your request.
1. Before
calling
for assistance
. . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Nothing
operate
Will
L
The power cord is not
plugged into a live circuit
with proper voltage.
Range is not properly
connected to gas supply.
A household fuse has blown
or a circuit breaker has
tripped.
Controls are not set correctly.
Plug the power cord into a live circuit
with proper voltage. (See Installation
Instructions.)
Contact an authorized Whirlpool
service technician to reconnect range
to gas supply. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
Reset controls, if needed.
28
Advertisement
Table of Contents
