Whirlpool SF367PEY Use And Care Manual page 22

4. Move the
LOCk
Lover to the right -the
Clean positlon Tt e Clean lndlcator Light
will come or'
5. After the Self-Cleaning cycle starts, the
Lock Indicator Lrg it comes on when the
oven temperature goes above normal
bakingiroasring tenperatures. The door
cannot be opened and the Lock Lever
must not be moved when the Lock
Indicator Light IS cn.
6. After the Self-Cleaning cycle is com-
pleted and the oven reaches normal
baking/roasting temperatures, the Lock
Indicator Light will go off. Move the Lock
Lever back to the 'eft. DO NOT FORCE
IT. Wait until it moves eastly. Turn the
Oven Selector ancl Oven Temperature
Control clockwise to OFF. The Clean
Indicator Light will go off.
7. After the oven is cool, wipe off any
residue or ash with a damp cloth. If
needed, touch up spots with a soapy,
steel-wool pad.
To stop the Self-Cleaning
cycle at any time:
1. Push in and turn the Stop Time Knob
clockwise until it points to the correct
time of day.
2. Turn the Oven Selector and Oven
Temperature Control to OFF. When the
Lock Indicator Light goes off, move
the Lock Lever back to the left. DO NOT
FORCE IT. Wait until it moves easily.
Special tips
l
Keep the kitchen well ventilated during the
l
If the Self-Cleaning cycle does not get
Self-Cleaning cycle to help get rid of heat,
the oven as clean as you expected, the
odors, and smoke.
cycle may not have been set long enough
l
After the oven is cool, wipe up any
or you may not have prepared the oven
residue or ash with a damp cloth or
properly. Set the Self-Cleaning cycle
sponge. If any spots remain, clean with a
longer the next time and hand-clean
mild abrasive cleanser or cleaning sponge.
areas noted on page 20.
l
Clean the oven before it gets heavily
soiled. Cleaning a very soiled oven takes
longer and results in more smoke than
usual.
22