Seat Alhambra Owner's Manual page 99

Changing the number plate light
Fig. 116 On the rear bumper: number plate
lights
Number plate light: Remove the bulb
Fig. 117
holder.
Complete operations only in the sequence
given:
Fuses and bulbs
Fixed number plate Bolted number plate
light
Press the flat part of the
screwdriver included in
Unscrew the number
the vehicle on-board
plate light screws using
›››
tools ( Fig. 101) in the
1. the screwdriver from
direction of the arrow,
the vehicle tool kit
in the groove of the
›››
( Fig. 101).
number plate light
›››
Fig. 116.
2. Detach the number plate light.
Press on the connector
Separate the attach-
lock in the direction of
ment tabs from the rear
›››
3. the arrow Fig. 117
panel of the number
and pull out the
1
plate light by pressing.
connector.
Rotate the bulb holder
in the direction of the Take the bulb holder
›››
Fig. 117
4. arrow out of the number plate
2
and extract it together light.
with the bulb.
5. Replace the faulty bulb with a new identical bulb.
Insert the bulb holder
into the number plate
Insert the bulb holder
light and rotate all the
6. into the number plate
way in the opposite di-
light.
rection to the arrow
›››
Fig. 117 .
2
Press on the attach-
ment tabs. The bulb
Plug the connector into
7. holder must be firmly
the bulb holder.
attached to the number
plate light.
Fixed number plate
light light
Insert the number plate light carefully into the
8. opening on the bumper. Ensure that the number
plate light is in the correct position.
Insert the number plate
light into the bumper
9.
until it audibly clicks in-
to place.
Bolted number plate
light
Tighten the attachment
screws for the number
plate light using the
screwdriver.
97