Seat Alhambra Owner's Manual page 95

Dipped beam and daytime lights
A
2. Remove the rubber cover on the rear of the head-
light.
3. Rotate the bulb holder to the left all the way and
pull it out backwards together with the bulb.
4. Depending on the model, the bulb is removed di-
rectly from the bulb holder or it may need to be ro-
tated and then removed.
5. Replace the faulty bulb with a new identical bulb.
6. Place the bulb holder in the headlight and rotate
to the right all the way.
7. Insert the rubber cover.
Main beam head- Side lights
lights
C
›››
1. Open the bonnet page 269.

2. Remove the rubber cover on the rear of the head-
light.
3. Press the wire clip Pull the bulb holder
downwards and pull the out backwards together
bulb holder out to- with the bulb.
2
gether with the bulb.
4. Depending on the model, the bulb is removed di-
rectly from the bulb holder or it may need to be ro-
tated and then removed.
5. Replace the faulty bulb with a new identical bulb.
Fuses and bulbs
Main beam head-
B
lights
C
6. Place the bulb holder in
the headlight and pull
the wire clip upwards
until it clicks into place.
7. Insert the rubber cover.
Note
The images show the left hand headlight
from behind. The structure of the right hand
side headlight is symmetric.
To replace the xenon headlight bulb
C
3
In the engine compartment: turn sig-
Fig. 108
nal indicator cover.
Side lights
C
Place the bulb holder in
the headlight and insert
completely.
Fig. 109
ing light
There is no need to remove the headlight to
replace bulbs.
Complete operations only in the sequence
given:
Turn signals
1.
Rotate the cover
2.
Rotate the bulb holder
1
3. left all the way and pull
it out backwards to-
gether with the bulb.
Depending on the model, the bulb is removed di-
4. rectly from the bulb holder or it may need to be ro-
5. Replace the faulty bulb with a new identical bulb.
Turn signal bulb holder and turn-
1
.
2
Turning lights
1
›››
Open the bonnet page 269.

›››
Fig. 108 in the direction of the
arrow and remove it.
Press the wire clip
›››
Fig. 109 to the downwards and pull the
bulb holder
2
›››
Fig. 109 out together
with the bulb.
tated and then removed.
2
»
93