Bulbs - Seat Alhambra Owner's Manual

Replacing a blown fuse
Image of a blown fuse
Fig. 62
Removing or fitting a fuse
Fig. 63
Preparation
● Switch off the ignition, lights and all elec-
trical equipment.
● Open the corresponding fuse box
›››
page 42
The essentials
Identifying a blown fuse
A fuse is blown if its metal strip is ruptured
›››
Fig. 62.
Point a lamp at the fuse to see if it has
●
blown.
To replace a fuse
● If necessary, remove the plastic pincers
from the fuse box cover.
● Small fuses: lock the pincer in from above
›››
Fig. 63 A.
● Larger fuses: move the pincer sideways
›››
over the fuse Fig. 63 B.
● Remove the relevant fuse.
Replace the blown fuse by one with an
●
identical amperage rating (same colour and
markings) and identical size.
● Replace the cover.

Bulbs

Bulbs (12 V)
Full-LED headlights are designed to last the
lifetime of the car and light bulbs cannot be
replaced. In case of headlight failure, go to
an authorised workshop to have it replaced.
Light source used for each function
Halogen headlights Type
Dipped beam headlights H7 LL
Main beam headlights/day-
H15 (double element)
time running lights (DRL)
Side lights W5W
Turn signal PY21W NA LL
AFS bi-xenon main head- Type
light
Daytime running lights (DRL) P21W SLL
Side lights W5W
Turn signal PY21W NA LL
Xenon bulb. Visit an
Dipped beam / Main beam authorised workshop
for replacement.
Front fog light Type
Fog lights HB4
LED rear lights Type
Side/brake light LED
Turn signal WY21W
Reverse lights W16W
43