Seat Alhambra Owner's Manual page 31

Current warning or information texts.
This option only appears when one of
the following texts is available. The
Vehicle status
number of available messages is dis-
played. Example 1/1 or 2/2.
›››
page 100
Different setting options, for example,
the Convenience, Lighting & Visibility
menus, and the time, speed warning
Configuration
with winter tyres, language, units of
measurement, or "Display off".
›››
page 30
(multifunction display) menu
MFD
The multifunction display (MFD) has two au-
tomatic memories: 1 - Partial memory and 2 -
Total memory. The selected memory will be
shown in the upper right-hand corner of the
display.
With the ignition switched on, and memory 1
or 2 displayed, briefly press
OK
from one memory to another
The memory stores the values for the
journey and the consumption from the
moment the ignition is switched on until
1
it is switched off again.
Trip memo-
If the journey is broken for more than 2
ry (for a sin-
hours, the memory is automatically
gle jour-
erased. If the journey is continued in less
ney).
than 2 hours after the ignition is switch-
ed off, the new data is added to the data
already stored in the memory.
The memory records the values for a spe-
cific number of partial trips, up to a total
of 19 hours and 59 minutes or 99 hours
2
and 59 minutes, or 1999.9 km (or miles)
Total mem-
for 9999 km (or miles), depending on the
ory (for all
model of instrument panel. On reaching
journeys).
either of these limits, the memory is au-
tomatically erased and starts to count
from 0 again.
Possible displays
Travelling time
Current fuel
consumption
Average fuel
consumption
to change
Operating
range
Distance cov-
ered
The essentials
This indicates the hours (h) and mi-
nutes (min) since the ignition was
switched on.
The current fuel consumption while
driving is displayed in l/100 km (or
miles per gallon, mpg); when the en-
gine is running but the vehicle is not
moving, in l/h (or gallons per hour).
When the ignition is switched on, the
average consumption (in l/100 km or
in mpg) is displayed after the vehicle
has moved approximately 100 metres
(328 feet). Otherwise horizontal lines
are displayed. The value shown is up-
dated approximately every 5 seconds.
Approximate distance in km (or miles)
that can still be travelled with the fuel
remaining in the tank, assuming the
same style of driving is maintained.
This is calculated using the current
fuel consumption.
Distance travelled, after ignition is
switched on, in km (or miles).
After the ignition is switched on, the
average speed will be shown after a
distance of approximately 100 metres
Average speed
(328 feet) has been travelled. Other-
wise horizontal lines are displayed.
The value shown is updated approxi-
mately every 5 seconds.
Digital display
Current speed displayed digitally.
of speed
Oil tempera-
Updated engine oil temperature digi-
ture digital
tal display
display
If the stored speed is exceeded (be-
Speed warn-
tween 30 - 250 km/h, or 18 -
ing at --- km/h
155 mph), an audible warning is given
together with a visual warning.
Changing between display modes
● In vehicles without multifunction steering
wheel: press the lever.
● Vehicles with a multifunction steering
wheel: press or .
 
Storing a speed for the speed warning
● Select the display Speed warning at
--- km/h .
● Press to store the current speed and
OK
switch off the warning.
● In addition, set the required speed by
pressing the rocker switch on the windscreen
wiper lever or buttons on the multifunc-
 
tion steering wheel for 5 seconds. Next,
»
29