Seat Alhambra Owner's Manual page 98

Rear lights in the body: Remove the
Fig. 115
bulb holder. to : Attachment tab
1 4
Complete operations only in the sequence
given.
Removing the rear light units
Complete operations only in the sequence
given:
Rear light, left
1. Open the rear lid
Open the storage com-
partments on the left-
2. hand side of the lug-
gage compartment
›››
page 164.
Rotate the cap 90°
1
3. in the direction of the
arrow and remove it.
96
Unscrew the attachment screw
4.
›››
Extract the rear light from the bodywork by careful-
5.
Pull the red strip on the connector and extract the
6.
Disassemble the tail light unit and place it on a
7.
To change the bulb
To release the bulb holder, press on the attach-
8. ment tabs
the arrow.
9. Remove the bulb holder from the rear light unit.
10. Replace the faulty bulb with a new identical bulb.
Place the bulb holder in the tail light unit. The at-
11.
tachment tabs should audibly click into place.
Rear light, right
Insert the connector and press the red attachment
12.
strip in so that the connector is locked into place.
›››
page 122.
Move the 12 V power
Assembling the rear light units
socket support by
Complete operations only in the sequence
pressing gently down-
›››
Fig. 114
wards
B given:
(arrow).
Emergencies
Rear light, left Rear light, right
›››
Fig. 114
ing the screwdriver from the vehicle tool kit
page 82. The bolt is secured in its position.
ly pulling backwards.
connector.
flat, clean surface.
›››
Fig. 115
to in the direction of
1 4
Rear light, left
us- Carefully insert the tail light unit into the opening
2
13. in the bodywork. To do this, insert the upper rear
light unit guide into the attachment ring.
Tighten the white attachment screw using the
14.
screwdriver from the vehicle tool kit.
Ensure that the tail light unit has been correctly
15.
fitted and is firmly secured.
Replace the cap
›››
Fig. 114
and ro-
1
16. tate it 90° in the oppo-
site direction of the ar-
row.
Close the storage com-
17.
partment.
18. Close the rear lid
Rear light, right
Move the 12 V power
socket support up-
wards gently until it is
correctly closed.
›››
page 122.