Seat Alhambra Owner's Manual page 223

Control lamps

Blinks or lights up yellow:
The system cannot clearly detect the
Lane assist sys-
page 221, The lane assist
lane. See
tem connected
system is inactive (control lamp lit
but inactive.
in yellow).
 Blinks or lights up green:
Lane assist system connected and active.
Several warning and control lamps light up
for a few seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
›››
Observe the safety warnings
and warning lamps on page 105.
Driver assistance systems
Operation mode
Fig. 219 In the windscreen: field of vision of
the lane assist system camera.
Using the camera located in the sun visor,
the lane assist system detects the possible
lines dividing it. When the vehicle involuntar-
ily approaches a dividing line it has detected,
the system will notify the driver with a correc-
in Control
tive intervention. It is possible to over-regu-
late the corrective intervention at any time.
If the turn signal is connected, there will be
no warning as the lane assist system under-
stands that you wish to change lanes volun-
tarily.
Steering wheel vibration
The following situations cause the steering
wheel to vibrate and require the driver to take
active control of the steering:
● If the limits inherent to the system are
reached.
● If the maximum rotational torque during
the corrective intervention is not enough to
keep the vehicle inside the lane.
● If during the corrective intervention by the
system the lane is no longer detected.
Switching the lane assist system on or off
● Select the corresponding menu option us-
ing the button for the driver assist systems
›››

page 26.
OR: activate or deactivate the system in the
●
menu Settings , sub-menu Assist sys-
›››
tems , menu Lane Assist
The "confirmation sign" indicates that the
driver assist system is switched on.
Automatic deactivation: the lane assist sys-
tem can be deactivated automatically if there
is a system malfunction. Control lamp
switches off.
The lane assist system is inactive (control
lamp lit in yellow)
● When driving speed drops to approx.
65 km/h (40 mph).
When the Lane Assist system does not de-
●
tect the dividing lines of the road. For exam-
ple, in the event of road works, and snow,
dirt, moisture or reflections.
When the radius of a curve is too small.
●

page 26.
»
221