Seat Alhambra Owner's Manual page 96

Turn signals
1
Place the bulb holder in
the headlight and ro-
6.
tate to the right all the
way.
›››
Rotate the cover Fig. 108
7.
tion to the arrow as far as it will go.
Always seek the help of a specialist when
changing the Xenon dipped beam and main
›››
beam headlamps in Introduction on
page 91.
Note
The illustrations show the left hand head-
light. The structure of the right hand side
headlight is symmetric.
94
Replacing the front bumper bulbs
Turning lights
2
Place the bulb holder in
the headlight and pull
the wire clip upwards
until it clicks into place.
in the opposite direc-
Fig. 110
bumper: removing the headlights.
Fig. 111
lights
Complete operations only in the sequence
given:
Emergencies
On the right-hand side of the front
Changing the bulbs in the head-
Pull the cover forwards, in the direction of the ar-
1.
›››
row Fig. 110.
›››
Unscrew the attachment screw Fig. 110
2. ing the screwdriver from the vehicle tool kit
›››
page 82.
Tilt the headlight slightly forward and extract it
›››
Fig. 111
3. from its lateral attachments
rows).
›››
Fig. 111
Release the connector
4.
it.
›››
Rotate the bulb holder Fig. 111
5. the way, in the direction of the arrow, and pull it
out backwards together with the bulb.
6. Replace the faulty bulb with a new identical bulb.
Place the bulb holder in the headlight and rotate
7.
to the right all the way.
›››
Insert the connector Fig. 111
1
8. holder . The connector must audibly click into
2
place.
Place the headlight into its position
9.
(small arrows) and tilt it backwards.
›››
Tighten the attachment screw Fig. 110
10.
ing the screwdriver.
›››
11. Replace the cover on the bumper
us-
1
(small ar-
and remove
1
to the left all
2
on the bulb
›››
Fig. 111
us-
1
Fig. 110.