only. "EPP" allows bidirectional parallel port operation at maximum
speed. "ECP" allows the parallel port to operate in bi-directional mode
and at a speed faster than the maximum data transfer rate. "ECP + EPP"
allows normal speed operation in a two-way mode.
6.6.9 LPT2 ECP Mode Use DMA
This selection is available only if you select "ECP" or "ECP + EPP" in
the Parallel Port Mode field. In ECP Mode Use DMA, you can select
DMA channel 1, DMA channel 3, or Disable. Leave this field on the
default setting.
6.7 Power Management Setup
By choosing the Power Management Setup option from the initial setup
screen menu, the screen below is displayed. This sample screen contains
the manufacturer's default values for the AIMB-330 series.:
Figure 6.10: Power management setup screen
6.7.1 Power Management Option
This category allows you to select the type (or degree) of power saving
and is directly related to the following modes:
There are four selections for Power Management, three of which have
fixed mode settings.
Min. Power Saving
AIMB-330F User's Manual
Minimum power management., Suspend Mode = 1 hr.,
and HDD Power Down = 15 min.
68