Navigation Operation - Axxera AVM72NAVLH Owner's Manual

Navigation Operation

Front 3.5mm Aux Input & Rear RCA A/V Input
Auxiliary Input
Using AV Input
Rear Camera Operation - (Optional)
Using Rear Camera
Auto Selection
17
AVM72NAVLH
Navigation Operation
To access navigation functions, select Navigation from the Mein Menu.
For questions regarding navigation operation, refer to the Navigation manual
available online at
Connect an optional audio source into the 3.5mm (front panel) input.
Select auxiliary input from the Main Menu to listen to audio.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Connect an optional audio/video source to the rear auxiliary input (Red/White/
Yellow RCA connectors). Refer to page 6 for details.
Select AV Input from the Main Menu to listen to audio.
Engage parking brake to watch video.
Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to the wiring diagram for details.
Manual selection - Touch CAMERA icon from the Main Menu or from any
operational mode (when enabled) to select camera mode.
on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle's reverse
light.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry.
Note: The external video output is not active when using the rear camera input.
OPERATION
www.axxeraaudio.com/support/manuals.php.
Touch the top left area