Technical Specifications - Gemini 932 Series User Manual

If, when disarming, the turn indicators flash 5 times and the
enabled ), it means that an alarm conditon has occured while away from your vehicle
The cause that triggered the
Turn ignition key "ON" ; the vehicle status LED will blink according to the last alarm detected.
Optical signals are repeated 3 times; to interrupt, turn ignition key "OFF".
The table below lists the various alarm causes and relative LED signals.
L E
LED OFF (2 seconds)
This product is guaranteed to be free from manufacturing defects for a period of 24 months from the
installation date shown on this warranty, in compliance with the Directive 1999/44/CE.
Please fill-in entirely the guarantee certificate included in this booklet and do NOT REMOVE the
guarantee label from the device.
The warranty will become void if labels are missing or torn, if the installation certificate is not fully
compiled or if the enclosed sale document is missing.
The guarantee is valid exclusively at authorized Gemini Technologies S.p.A. Service Centers.
The manufacturer declines any responsibility for eventual malfunctions of the device or any damage
to the vehicle electrical system due to improper installation, use or tampering.
This alarm system is solely intended to be a theft-deterrent device.
4.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
The present device does not fall within the scope of Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE) as specified in art. 2.1 of L.D. no. 151 of 25/07/2005.
Current absorption @ 12Vdc with system armed and LED flashing
Turn indicators relay contact capacity
Engine immobiliser relay contact capacity
Maximum positive current output when armed (+A)
PAGE 4
2.9 - ALARM MEMORY
last alarm can be identified by the LED memory.
D F L A S H E S
LED ON (1 second)
3.0 - WARRANTY CONDITIONS
(WEEE) DIRECTIVE

TECHNICAL SPECIFICATIONS

Power supply
Working temperature
Alarm cycle duration
Maximum load of siren output
siren
A L A R
Ignition attempt (+15/54)
Door opening
Bonnet opening
Boot opening
Volumetric or external sensor
Wire tampering
range
chirps 5 times ( if feature has been
.
M C A U S E S
12 Vdc
15 mA
-30°C to +70°C
8 A @ 20°C
8 A @ 20°C
30 sec.
700 mA
ALARM
CYCLES
10
10
1 0
10
10
10
1 A