Warranty Conditions; Technical Data - Gemini 7725T Installation Manual

4.0 - ACOUSTIC SIGNAL EXCLUSION
Follow the indications reported below for alarm arming/disarming sound
exclusion:
!
Disconnect the siren wiring connector.
!
Arm the alarm system (wait for the end of the neutral time).
!
Connect the siren's connector again.
!
Disarm the alarm system; alarm arming/disarming acoustic signals are now
excluded.
NOTE: to restore acoustic signals, disconnect and re-connect the siren wire
connector with the system disarmed.

5.0 - WARRANTY CONDITIONS

This product is guaranteed to be free from manufacturing defects for a period
of 24 month from the installation date shown on this warranty, in compliance
with the directive 1999/44/CE.
Please fill-in entirely the guarantee certificate included in this booklet and do
NOT REMOVE the guarantee label from the device.
The warranty will become void if labels are missing or torn, if the installation
certificate is not fully compiled or if the enclosed sale document is missing.
The guarantee is valid exclusively at Authorized Gemini Technologies S.p.A.
Centers.
The manufacturer declines any responsibility for eventual malfunctions of the
device or any damage to the vehicle electrical system due to improper
installation, use or tampering.
This alarm system is solely intended to be a theft-deterrent device.
6.0 - W ASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE) DIRECTIVE
The present device does not fall within the scope of Directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE) as specified in art. 2.1 of
L.D. no. 151 of 25/07/2005.

7.0 - TECHNICAL DATA

Power supply
Power supply range
Current absorption @ 12Vdc
Functioning temperature range
Sound power radiated
12 Vdc
10 - 15Vdc
2,5mA (system armed)
6,5mA (system disarmed -
battery on charge)
-35°C- +80°C
>109dB @ 1 meter