Table of Contents
Advertisement
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Static Colors
To choose a static color, follow the instructions below:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Automatic Programs
To run the Rotosphere Q3 in automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Automatic Programs Speed
To change the auto-program speed on theRotosphere Q3, follow the instructions below:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> increase or decrease the program speed (S--1-100).
4.
Press <ENTER>.
Sound-Active Mode
To change the auto-program speed on theRotosphere Q3, follow the instructions below:
1.
Press <MENU> repeatedly until Snd shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> increase or decrease the program speed (S--1-3).
4.
Press <ENTER>.
Custom Color Mixing
To custom mix a static color, follow the instructions below:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> and one of the following will show on the display:
•
r_ _ _ (red)
•
g_ _ _ (green)
•
b_ _ _ (blue)•
•
U_ _ _ (white)
•
S_ _ _ (strobe)
•
DI-L_ _ _ (Motor Direction Left)
•
DI-R_ _ _ (Motor Direction Right)
•
M_ _ _ (Motor Rotation Speed)
Page 12 of 18
O
PERATION
Rotosphere Q3 User Manual Rev. 1
Advertisement
Table of Contents
