Triple Watch; Transmitting - Uniden UH9000 Owner's Manual

Operation

Triple Watch

Triple watch will continuously monitor the two Instant Channel and the current channel
for activity (see Programming the Instant Priority Channel-1/Channel-2, page 18).
Press [TRIPLE] to switch Triple watch On/Off.
• Every 1.5 seconds the Instant channel is monitored for 40msec.
• Triple watch function stops temporarily when receiving a signal.
NOTE
• Triple watch function is invalid in Scan mode.

Transmitting

The UH9000 transmits only on UHF-CB Channels.
For your reference a list of the available channels, corresponding
frequencies and guidelines for their use and selection is printed on
page 34 - page 40. For Australia, Channels 05 and 35 are reserved for
NOTE
Emergency Calls.
Select the desired channel. Press the microphone's [PTT] button and speak normally
into the microphone. Hold it approx. 7cm from your mouth. Release [PTT] to end the
transmission and listen for a reply.
UNIDEN UH9000
19
UHF CB Transceiver