Table of Contents
Advertisement
To switch the extractor on or off:
•
Press the "Power" button "D" once. After switching on the motor
will automatically start at the lowest speed setting.
Setting the extractor speed when it is running:
The extractor may run at a choice of 4 speeds, indicated by the LED
lights on the remote control.
•
To increase the speed press the "Plus" button "B". The speed will
increase by one increment for each push of this button.
•
To decrease the speed press the "Minus" button "F". The speed
will decrease by one increment for each push of this button until it
reaches speed 2.
•
To switch from a higher speed to the lowest one it is necessary to
press the "Power" button "D" twice (once to switch the motor off
then second time to restart it at the lowest speed).
To switch the light on or off:
•
Press the "Light" button "C".
The timer function:
The timer function sets the extractor to switch itself off after ten
minutes have passed. This is ideal when you leave the kitchen after
cooking as the extractor can be left to clear the air then switch off to
save power, without you disturbing your meal to switch it off.
•
To set this function, press the "Timer" button "E"; the right hand
LED on the remote control will start to flash slowly (once every five
seconds).
•
To cancel this function, press either the "Plus" or "Minus" button "B"
or "F" on the remote control.
5
Advertisement
Table of Contents
