Defects Finding Guide /6; Cleaning Of The - Beko 4305ED User Manual

GB
Inside cleaning
Before starting the cleaning, unplug the
appliance from the mains.
 It is advisable to clean the appliance when
you defrost it.
 Wash the inside with lukewarm water
where you add some neutral detergent. Do not
use soap, detergent, gasoline or acetone
which can leave a strong odour.
 Wipe with a wet sponge and dry with a soft
cloth.
During this operation, avoid the excess of
water, in order to prevent its entrance into the
thermal insulation of the appliance, which
would cause unpleasant odours.
Outside cleaning
 Clean the outside of the appliance by means
of a sponge soaked in soapy warm water, wipe
with a soft cloth and dry.
 The cleaning of the outside part of the
refrigerating circuit (motorcompressor,
condenser, connection tubes) will be done with
a soft brush or with the vacuum-cleaner.
During this operation, please take care not to
distort the tubes or detach the cables.
Do not use scouring or abrasive materials !
 After having finished the cleaning, replace
the accessories at their places and plug in the
appliance.
Defects finding guide
The appliance does not work.

There is a power failure.

The plug of the supply cord is not inserted
well into the socket.

The fuse is blown.
The thermostat is in „OFF" position.

The temperatures are not low enough(red
LED on – for the model with signalling
system).

The food prevents the sliding lids from
closing (the charging limit was exceeded).

The appliance was not placed correctly.

The appliance is placed too close to a heat
source.

The thermostat knob is not in the correct
position.
Excessive ice build-up

The sliding lids have not been closed
correctly.
The following are not defects

Possible noddings and cracks coming from
the product: circulation of the refrigerant in
the system.
6
Instruction for use