Defects Finding Guide /6 - Beko HSA 32540 GD User Manual

GB
I nsid e clea ni n g
Before starting the cleaning, unplug the
appliance from the mains.
 It is advisable to clean the appliance when
you defrost it.
 Wash the inside with lukewarm water
where you add some neutral detergent. Do
not use soap, detergent, gasoline or acetone
which can leave a strong odour.
 Wipe with a wet sponge and dry with a soft
cloth.
During this operation, avoid the excess of
water, in order to prevent its entrance into the
thermal insulation of the appliance, which
would cause unpleasant odours.
O utsi de cl eani ng
 Clean the outside of the appliance by
means of a sponge soaked in soapy warm
water, wipe with a soft cloth and dry.
 The cleaning of the outside part of the
refrigerating circuit (motorcompressor,
condenser, connection tubes) will be done
with a soft brush or with the vacuum-cleaner.
During this operation, please take care not to
distort the tubes or detach the cables.
Do not use scouring or abrasive materials !
 After having finished the cleaning, replace
the accessories at their places and plug in the
appliance.
D efect s fi n din g g uide
T he a p p l i a n c e d o e s no t w o r k .

There is a power failure.

The plug of the supply cord is not inserted
well into the socket.
 The fuse is blown.
The thermostat is in „OFF" position.

T he t e m p e r a t u r e s a r e n o t l o w
e n o u g h ( r e d L E D o n – f o r t h e mo d e l
wi t h si g n a l l i n g s y s t e m) .

The food prevents the sliding lids from
closing (the charging limit was
exceeded).
 The appliance was not placed correctly.

The appliance is placed too close to a heat
source.
 The thermostat knob is not in the correct
position.
E x c e s s i ve i c e b u i l d - u p

The sliding lids have not been closed
correctly.
Th e f o l l o w i n g a re n o t d e f e ct s
Possible noddings and cracks coming

from the product: circulation of the
refrigerant in the system.
6
Instruction for use