Connect Cables - Cisco DX70 Installation Manual

Connect Cables

1. Pull the foot stand, set the DX70 in an upright position and adjust the angle.
2. Flip the connector cover up to access the connector panel.
3. Connect the Ethernet cable (A) between the network connector
wall socket. Alternatively, you can use a Wi-Fi connection.
4. Connect the provided power adapter and cable (B) between the DX70
power socket.
To use the same network wall socket for both your computer and DX70, connect your
computer to the computer network port on the DX70, and the DX70 to the network wall
socket (see step 3).
Service port
3
USB HDMI HDMI
in out
3
1
Computer
network
Network
1 and a network
2
and a
Kensington
lock
2
Power