Priority To The Lower Tray - Canon C850 Practical Manual

Increasing a Paper Loading Capacity by Giving Priority to the Lower Tray
The finisher has a two-tiered paper tray, and the lower tray can stack many more printouts than the upper tray� If you
designate the lower tray for large volumes of printing, productivity improves because you do not need to remove the
printed paper as often�
Finisher-AM1
▀
Paper loading capacity of tray B is larger than that of tray A� For more information on
specifying the output tray, see the following�
"Settings/Registration" > "Output Tray Designation" in the User's Guide
High Volume Stack Mode
▀
If you set the High Volume Stack Mode to 'On' , the tray order to which printouts are output is fixed� For example, when
you print a job to tray A and B on the Finisher-AM1 with the High Volume Stack Mode 'On' , the printouts are stacked
on the tray B first, and after the tray B reaches its capacity, the printed paper is stacked on tray A� You can improve
productivity by setting the High Volume Stack Mode to 'On' and using tray B first� For more information on the High
Volume Stack Mode, see the following�
"Settings/Registration" > "High Volume Stack Mode" in the User's Guide
NOTE
Depending on the finisher you are using, the High Volume Stack Mode may not be available�
Improving Productivity
imagePRESS C850/C750/C650/C65
119