7
Close the feeder → press [Start Scanning]�
NOTE
Open and close the feeder gently� Make sure that the guide sheet remains aligned when closing the feeder�
8
Turn the test page upside down, and then align the mark
scan operation with the mark on the guide sheet → press [Start Scanning]�
9
Turn the test page over, and then align the mark
operation with the mark on the guide sheet → press [Start Scanning]�
10
Turn the test page upside down, and then align the mark
scan operation with the mark on the guide sheet → press [Start Scanning]�
11
Adjustment is complete�
If you have specified multiple output test pages, repeat steps 6 to 10 for all of the output test pages� In this
case, adjustment is complete when all of the test pages have been scanned�
Make sure that the test pages are scanned in the order they are output�
How to Fix Misalignment of Images
on the test page for the second
on the test page for the third scan
on the test page for the fourth
imagePRESS C850/C750/C650/C65
81