3
Place the spectrophotometer, X-Rite i1 Pro, on the
cradle and click [Continue]�
4
Place the sensor of the spectrophotometer on the
calibration page�
• Place several sheets of blank paper on a flat surface and
place the calibration paper on the top�
• Focus the sensor of the spectrophotometer on the white
area indicated by the red frame in the image�
5
Hold the spectrophotometer button and scan the
cyan strip�
• Hold the spectrophotometer button until you see
<Scanning the Cyan strip���>� Keep holding the button
and move the spectrophotometer from the top to the
bottom to scan the cyan strip�
• Release the button after you have finished scanning�
6
Scan the magenta, yellow, and black strips in the same way�
Getting the Best Colors from Your Machine
imagePRESS C850/C750/C650/C65
23