Step 4 Try This If You Still Have The Same Problems - Canon C850 Practical Manual

Step 4 Try This If You Still Have the Same Problems

If the problems persist after following the procedures in steps 2 and 3, try the procedures described below� They may
improve the situation� However, these procedures differ from the purchase order, so be sure to get the customer's
consent beforehand�
Changing the Types of Paper to Print on
▀
Use thicker or stiffer paper to prevent the paper from wrapping around the fixing belt�
Reducing the Density
▀
Decrease the density in very dark areas� As the amount of toner applied to the paper is reduced, the paper separates
more easily from the surface of the fixing belt and other parts of the machine�
Enlarging the Leading Edge Margin
▀
Enlarge the width of the margin on the leading edge of the paper� A wider margin on the leading edge of the paper
makes the paper itself separate more easily from the surface of the fixing belt and other parts of the machine�
If a Certain Type of Paper Often Wraps around the Fixing Belt
You can adjust the value for the leading edge margin that is used for a certain type of paper�
→ [Preferences] → [Paper Settings] → [Paper
Press
Type Management Settings] → select the type of
paper you are using that is having this problem →
press [Details/Edit] → [Change] for <Adjust Lead/Tail
Margins> → adjust the value for [Lead Edge] toward
the plus end�
"Paper Type Management" > "Adjusting the Lead
Edge/Tail End Margins" in the User's Guide
Repeated Paper Jams Caused by Paper Wrapping around the Fixing Belt
imagePRESS C850/C750/C650/C65
115