Canon C850 Practical Manual page 99

Step 2 Adjusting the Saddle Stitch Fold Position to the Center of the Booklet
NOTE
If the saddle stitch position is not exactly in the center of the booklet, follow the procedures in step 1 "Adjusting the
Saddle Stitch Position to the Center of the Booklet� "
1
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings]�
Press
"Paper Type Management" > "Adjusting the Saddle Stitch Fold Placement" in the User's Guide
2
Select the paper type that you want to edit from
the list → press [Details/Edit] → [Change] for <Adj�
Saddle Stitch Fold Pos�>�
3
Press [ ] or [
position�
• If you want the saddle stitch fold position to shift to
the right while facing the printed side of the printout,
increase the setting value�
• If you want the saddle stitch fold position to shift to
the left while facing the printed side of the printout,
decrease the setting value�
4
Make test prints and check the finish�
• If the saddle stitch position is exactly in the center of the
booklet, but the saddle stitch fold position is not, repeat
steps 1 to 4 until the saddle stitch fold position is shifted
exactly to the center of the booklet�
] to adjust the saddle stitch fold
How to Adjust the Saddle Stitch Position
imagePRESS C850/C750/C650/C65
97