Canon C850 Practical Manual page 28

Calibrating for Paper You Want to Use for Printing
▀
You need to calibrate the machine for the paper you are actually using� Make sure you complete the procedure in
"Calibrations on the Machine" (p� 19) in "Required Calibrations, " even if you are not going to use "Canon Océ Top Colour
Paper (100 g/m )� "
2
Calibrations on the Machine
This section explains how to create new standard values
for calibration� You must use uncoated paper for the
calibration even if you are using some type of paper other
than uncoated paper for printing� If this is the case, use
an uncoated paper that is as close as possible to the basis
weight of the paper you are using for printing� For more
information, see "Types of Paper You Can Use for Calibration"
at the end of this document�
1
Load the paper you want to use for calibration�
• Make sure that "Canon Océ Top Colour Paper (100 g/m
2
Change the paper type of the paper drawer to
match the paper type loaded in step 1�
"Settings/Registration" > "Registering the Paper Size
and Type for a Paper Source" in the User's Guide
→ [Preferences] → [Paper Settings] → [Paper
• Press
Settings] to set the paper type�
26 26
imagePRESS C850/C750/C650/C65
Paper for Calibration
Paper for Calibration
2 )" is also loaded properly for use�
Auto Adjust Gradation
(Full Adjust)
Auto Correct Color
Tone Settings
(Register Correction Pattern)