Maintenance; Replacing The Battery; Cleaning - AEMC CA811 User Manual

Use only factory specified replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair
done other than by its service center or by an approved repair center.
5.1

Replacing the Battery

The symbol appears on the display when replacement is needed.
Replace with a standard 9V battery (NEDA 1604, 6LR61).
To replace the battery:
• Turn the Lightmeter OFF.
• Remove the rubber holster.
• Remove the screw from the back of the meter and lift off the bat-
tery cover.
• Replace the battery, then put the rear cover and holster back on.
5.2

Cleaning

• Use a soft cloth lightly dampened with soapy water.
• Rinse with a damp cloth and then dry with a dry cloth.
• Do not use any abrasives or solvents.
• Do not let any liquid enter the case or sensor area.
10
Shop for AEMC products online at:
CHAPTER 5

MAINTENANCE

Lightmeter Models CA811 and CA813
ShopAEMC
www.
will not be held
®
.com 1.877.766.5412