To Edit Touchscreen Settings - Carrier equipment touch User Manual

To edit touchscreen settings
1 On the System View screen, touch Setup > Touchscreen Setup.
2 Touch a button to jump to one of the following screens:
Screen Description
About Displays information about the touchscreen firmware.
Inactivity Timeout Lets you define how long the Equipment Touch can have no activity before
returning to the Standby screen and logging out the user. Set to 0 to deactivate
this feature.
Sensor Setup Lets the installer set up the Equipment Touch's temperature and humidity sensors.
Clean Screen Displays a one-minute countdown timer so that you can clean fingerprints from the
display window without touching something that would affect equipment operation.
Key Click Off/On Touch Key Click Off to turn off the sound when you touch a field or button. Touch
Key Click On to turn on the sound.
Alarm Sound Off/On Touch Alarm Sound Off to turn off the alarm notification sound or touch Alarm
Sound On to turn on the sound. An alarm will generate a sound only if it is set up in
ViewBuilder to do so.
Reload Firmware Lets the installer update the firmware through the USB port. See "To update the
Equipment Touch's firmware" in the Equipment Touch Installation and Setup
Guide.
Carrier Proprietary and Confidential
18
Equipment Touch CARRIER CORPORATION @2015
User Guide All rights reserved